•
Once you have located an optimal location for the servo mount glue into place with 15
minute Epoxy.
◦
Once it has dried install your throttle servo with the arm facing towards the motor or
firewall. Drill your servo screw holes and harden as listed before. Hook up servo to
your control arm on the servo with a Z-bend and plastic wire keeper
•
Locate the Engine access hatch and use self-ta screws to tightly secure to the engine
mount mount box.
Fuel Tank
•
Your RedWing RC MSX-Sbach comes with a pre plumbed fuel tank per-installed for
you. If you chose to use this or an upgraded fuel tank the process is the same to
installation