7
PRECAUTIONS
• Installation of this unit requires special skills and experience.
For maximum safety, have it installed by your dealer or
qualified service professional. Retro Manufacturing, LLC,
is not liable for any problems resulting from improper
installation of the unit. Always follow the instructions
carefully while attempting any installation.
• Follow instructions when wiring the unit. Failure to follow the
instructions could cause damage to the unit, fire, injury or death.
• Be careful when routing the wiring and harnesses. Prevent
the wires from being damaged by screws or moving parts
such as seat rails. Do not route wiring near heat sources or
beneath heavy objects that may crush or damage coating. If
the wiring must be routed around sharp metal edges, protect
them by wrapping them with vinyl tape or similar protection.
NOTE: Cutting the main wire harness, antenna lead, USB or auxiliary cables
will void the warranty of your radio.
• Use only the designated parts and appropriate tools
to install this unit. The use of parts other than those
supplied may result in internal damage to the unit.
• Do not interfere with safety-related vehicle components.
Never wire or affix this unit to the fuel tank, brakes,
suspension, steering wheel, pedals, etc. Check for electric
wiring, piping and other items before installing the unit.
• Never install the unit in a location where it
interferes with your field of vision.
• Never splice into the power lead to supply
other equipment with power.