17
Redondo RS
Install your knobs (Redondo RS only) by sliding the rear knobs over the
shaft, rotating them into the correct position and pushing them into
place. Mount the front knobs by gently pressing them onto the shaft
(see Figure 9).
DO NOT PRESS TOO HARD. PRESSING TOO HARD CAN DAMAGE YOUR SHAFTS AND
WILL VOID YOUR WARRANTY.
(View from behind dash)
INSTALLATION INSTRUCTIONS
Slide rear knobs onto shafts
and rotate until they slide into place
Slide front knobs onto shafts
Use the backstrap to
secure the radio to the
factory mounting points
Figure 9 - Mounting the Knobs
Figure 8 - Backstrap
Installing the Backstrap
You’ll need to secure the rear of the radio using the supplied backstrap
and hardware (see “What’s in the Box” on page 4 and 5). The
backstrap mounts using the threads at the rear of the radio body and
can be bent and adjusted to align with the mounting point of the
original factory radio behind the dash (see Figure 8).
THE SHAFTS ARE NOT STRONG ENOUGH TO SUPPORT THE WEIGHT OF THE RADIO.
FAILURE TO SECURE THE RADIO WITH THE BACKSTRAP CAN DAMAGE YOUR SHAFTS
AND WILL VOID YOUR WARRANTY.
