Redmond RMC-M90FR, Руководство пользователя

Страница: 40 / 80

40
Reheat Function
REDMOND RMC-M90FR can be used for warming up cold meals. To reheat:
• Put the products into the bowl. Place the bowl inside the device.
• Close the lid until it clicks into place and plug in the unit.
• Press and hold down “Réchauffer/Annuler” button for a few seconds until an audible sound is produced. Corresponding indicators light up and
“reheating” process begins. The timer starts its countdown.
The meal will be warmed up to 70–75°C and the temperature will be maintained for the next 24 hours. To cancel the function press and hold down
“Réchauffer/Annuler” button. Corresponding indicators go off.
The function may operate for a period of 24 hours, however, we recommend using it moderately, because a prolonged thermal exposure may sometimes
affect flavor characteristics of the meal.
Standard Operating Procedure for Automatic Programs
1. Measure the ingredients according to the recipe.
2. Put them into the bowl. Make sure that all the ingredients including liquid are below the scale mark indicating maximum capacity. Place the
bowl inside the device. The bowl and the heating element must fit tightly.
3. Close the lid until it clicks into place. Plug in the unit.
4. Repeatedly press “Menu/Maintien au chaud” button to select the program (corresponding indicator lights up).
5. Use “Hour” and “Min” buttons to adjust the time set by default for each program.
6. Set Time Delay function if needed. Time Delay function is not available in “FRIRE”, “PÂTES” and “EXPRESS” programs.
7. Press and hold down “Départ” button. “Départ” and “Réchauffer/Annuler” button indicators light up. Set program starts running and the count-
down begins. Countdown of the “VAPEUR” program begins only when water comes to a full boil, providing enough steam. In “PÂTES” — after
water comes to a full boil, products are added and “Départ” button is being repressed.
8. Press and hold down “Menu/Maintien au chaud” button to disable the Keep Warm function in advance if needed (“Réchauffer/Annuler” button
indicator goes off). Repress “Menu/Maintien au chaud” button to reactivate the function. Keep Warm function is not available in “YAOURT” and
“PAIN” programs.
9. When cooking time expires, the device makes an audible sound. Depending on your settings the unit either switches to “Keep Warm” (“Réchauff-
er/Annuler” button indicator lights up) or enters standby mode (“Départ” button indicator blinks).
10. To interrupt cooking process at any stage, to cancel set program or the Keep Warm function press and hold down “Réchauffer/Annuler” button.
To achieve better cooking results, we recommend consulting the cookbook provided. Each out of 100 recipes has been adjusted for this particular model.
If you did not achieve the desired result using automatic programs, try versatile program called “MULTICOOK”, featuring a wide time and temperature
adjustment range. This program gives endless opportunities for new culinary experiments.