22
BEFORE CALLING FOR SERVICE
Error Code
Error Description
Error Handling
E1 – E4
System error (possible temperature sensor
malfunction).
Do not operate the device without the bowl!
Unplug the device, let it cool down for 10–15 minutes, add water/stock and resume
cooking.
If this does not eliminate the error address an authorised service center.
Problem
Possible Cause
Solution
The device does not switch on
Voltage supply failure
Check the voltage supply
The dish is taking too long to cook
Voltage supply interruption
Check the volatge supply
There is a foreign object between the bowl and the heating element Remove the foreign object
The bowl was not installed properly
Install the bowl evenly, avoiding distortion
The heating element is dirty
Unplug the device and let it cool down. Clean the heating element
The packaging, user manual and the device itself may not be treated as household waste. Instead, it shall be taken to the applicable collection
point for the recycling of electrical and electronic equipment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
Содержание RMC-250A
Страница 2: ...1 2 3 4 5 7 8 12 9 10 6 11 14 15 16 13 17 A1...
Страница 3: ...MENU MASTERCHIEF SAVE RESET TIME DELAY KEEP WARM CANCEL REHEAT OK START TEMP 1 2 4 3 5 6 7 8 9 A2...
Страница 5: ...ENG 6 FRA CAN 23 ESP 43...
Страница 63: ...63 RMC 250A ESP...