RedMax GZ7100, Руководство по ремонту

Страница: 17 / 52

SAFETY EQUIPMENT
English – 17
Fig. 12
Fig. 13
Fig. 14
Fig. 15
B A
C
D
E
Fig. 16
Throttle lock
1. Remove the tank unit from the motor unit.
!
WARNING!
The fuel that is used in the chainsaw
poses the following hazards:
1. The fl uid and its fumes are poisonous.
2. Can cause skin irritation.
3. Is highly infl ammable.
2. Press out the throttle lock pivot (A) with the help of a
driver. See fi g. 12.
3. Twist the throttle lock as shown in fi g. 13 and lift it
out of the hand grip together with the spring.
4. Press out the throttle lever pivot (B) with the help of
a driver. See fi g. 12.
5. Lift out the throttle lever and cable and remove the
cable.
Dismantling
Reassembly
1. Assemble the throttle lever and cable and locate
them in the tank unit. Ensure that the cable lever arm
(E) is between the lip (D) and the under-side of the
hand grip. See fi g. 15.
2. Press home the throttle lever pivot (B) with the help
of a driver. See fi g. 12.
3. Locate the spring in the recess in the throttle lock.
Hold the spring in place and locate the throttle
lock in the recess in the hand grip. See fi g. 16.
4. At the same time, arrange the throttle return spring
as shown in fi g. 16.
5. Twist the throttle lock so that the catch (E) can pass
down beside the throttle lever inside the hand grip,
as shown in fi g. 13.
6. Press in the throttle lock pivot (A) with the help of a
driver.
7. Refi t the tank unit onto the motor unit.
Inspection
Clean the components and check the following:
1. The throttle cable and lever arm are undamaged and
run freely.
2. The lock activation mechanism is not worn. See C in
fi g. 14.