RedMax 967683802, Руководство по ремонту

Страница: 32 / 50

32 – English
Carburettor
12.1.2 Dismantling
Dismantling
1. Remove the cylinder cover and air filter.
2. Remove the carburettor control (A) by pushing it
towards the carburettor and lifting.
3. Unhook the throttle cable and remove the choke
control.
4. Remove the fuel pipe (B) and the impulse
channel (C).
5. Remove the bolts (D) which secure the filter
holder, carburettor and intake tube.
6. Loosen the filter holder and lift off the
carburettor. Leave the filter holder in the
carburettor space.
Carburettor
1. Remove the cover (E) over the metering unit
and carefully remove the metering diaphragm
(F) and gasket. See fig. 9.
2. Remove the screw (G) and take out the needle
valve (H) with lever, spindle and spring. See fig.
9.
3. Remove the cover (I) over the pump unit and
carefully remove the gasket (J) and pump
diaphragm (K). See fig. 10.
4. Use a needle or the like to carefully remove the
fuel filter (L). See fig. 10.
5. Remove the high and low speed screws. See
fig. 12.
6. If necessary, remove the throttle and choke
valves and remove the spindles together with
levers and springs. See fig. 12.
WARNING!
The fuel used in the chainsaw has
then following hazardous
properties:
1. The fluid and its fumes are
poisonous.
2. Can cause skin irritation.
3. Is highly inflammable.
Fig. 8
Fig. 9
Fig. 10
A
D
D
C
B
H
G
F
E
I
J
K
L