RedMax 967683802, Руководство по ремонту

Страница: 18 / 50

18 – English
Safety equipment
7.4 Throttle lock
7.4.1 Dismantling
1. Remove the hand grip insert (C). See fig. 12.
2. Remove the throttle lock pivot (A) with the help
of a driver. See fig. 12.
3. Press apart with a screwdriver or the like the
throttle lock/control and take out the throttle lock
from the recess in the hand grip. Now remove
the spring. See fig. 13.
4. Remove the stop switch. Press out the throttle
lever pivot (B) with a driver. See fig. 12 and 15.
5. Remove the throttle cable and lever. See fig. 15.
7.4.2 Inspection
Clean all components and check the following:
1. That the throttle cable and lever are undamaged
and run easily.
2. That the lock activation mechanism is not worn.
See fig. 13.
7.4.3 Assembly
3. Fit the throttle cable and lever. Fit the throttle
lever with pivot (B). See fig. 12 and 15.
4. Fit the spring in the recess in the throttle lock.
Hold the spring in place and locate the throttle
lock in the recess in the hand grip.
5. Fitting of the throttle lock is simplified by using a
screwdriver or the like to lock the spring. See fig.
14.
6. Fit the throttle lock pivot (A) with the help of a
driver. See fig. 12.
7. Fit the switch and hang grip insert.
Fig. 12
Fig. 15
A
B
Fig. 13
Fig. 14
B
C