RedMax 967683802, Руководство по ремонту

Страница: 26 / 50

26 – English
Centrifugal clutch
10.1 Centrifugal clutch
10.1.1 Dismantling
When dismantling the centrifugal clutch the chain
brake must be in the off position.
1. Remove the cylinder cover, chain and bar. See
the instruction book.
2. Remove the chain guide plate by unscrewing
the bolt (A). See fig. 1.
3. Remove the locking ring (B) with washer and lift
up the clutch drum (C) with needle bearing (D)
and chain drive sprocket (E). See fig. 2.
4. Remove the spark plug and fit the piston stop.
Remove the clutch with the clutch tool.
5. Note – left-hand thread. Screw in the direction
of the arrow as shown in fig. 3.
The following steps (5-6) describe the dismantling
of clutch hub.
1. Stretch out the springs with circlip pliers and
press them out from the clutch hub.
2. A complete clutch or springs are available as
spare parts.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
A
B
E
C
D
10 Centrifugal clutch
NOTE!
The clutch springs must not opened more than
is necessary. Risk of deformation.