RDL-3000
INSTALLATION GUIDELINES
70-00159-01-06
Proprietary Redline Communications © 2012
Page
17
of 65
kune 12, 2012
Figure 2: Features: System Components
3.3
Interface Ports
Ethernet Port
The Ethernet port (RJ-45 / F connector) receives DC power and provides Ethernet
connectivity with the local network. The Ethernet port connects to the PoE adapter using
a weatherproof CAT-5e Ethernet cable.
Note: The PoE does not amplify the Ethernet signal. The maximum total length of the
Ethernet cable is 91.5 m (300 ft). For example, 90 m (295 ft) from the RDL-3000 to the
PoE and 1.5 m (5 ft) from the PoE to the local network equipment.
GPS Antenna Port (RDL-3000-G)
The GPS antenna port (TNC / F connector) conducts RF signals between the RDL-3000
and the antenna system (ordered separately). This port is provided only on units factory-
equipped with GPS hardware. The GPS antenna can be located remotely from the RDL-
3000 unit by using up to 46 m (~150 ft) of high quality antenna cable. The GPS module
does not set the RDL-3000 internal date/time clock.
Figure 3: Features - RDL-3000-G with GPS Antenna, Sync, and Ethernet Ports
