31
“
SET CLOCK
”
Keypad Switch
Setting the clock -
To set the clock, press the
“SET CLOCK”
keypad switch.
Display changes to:
Set CLK 00:00 AM or PM
use < >, 0 - 9
The display reads 00:00 which stands for Hours:Minutes. The underline is the cursor, to
set the clock, use the cursor movement (“<“ or “>“) keypad switches to move the cursor
beneath the position you wish to change. To change the setting use the numbers located
at the bottom of the keypads. To change between AM and PM move cursor beneath A or P
and press any
numbered
keypad switch.
Once the current time has been set you MUST, press the
“ENTER”
keypad switch.
Display changes to:
System ready
Select Mode:
Alternating with...
System ready
Example:
07:12 AM
(current clock time)
NOTE:
The SET CLOCK display will automatically be exited after 30 seconds of no Keypad
activity.
“
STOP
” Keypad switch
The STOP switch is used to stop purge operation. Pressing the STOP key will halt purge
operation regardless of current status. The STOP key may also be used to exit certain
functions.
“
MANUAL
” Keypad switch
(for additional information see “Operating Modes” page 29
)
To enter the Manual mode. Press the “MANUAL" Switch. The display will read “Manual” mode
indicating the purge is operating in the "MANUAL" mode. The purge will remain in the
“Manual" mode until another keypad switch is pressed such as STOP, SET CLOCK, or until a
different mode is selected.
Display changes to:
ON Manual
Example:
Time: 10:24
AM
(time of day)
NOTE:
While in the “MANUAL” mode the display may alternate between one or more
displays. The display will usually be self explanatory.
Содержание Redi-Purge PRG-113-C3
Страница 2: ...2 Revised Technically as of October 11 2013 1994 REDI CONTROLS INC GREENWOOD INDIANA...
Страница 4: ...4...
Страница 67: ...67...