Redexim Turf Tidy 2300, Руководство пользователя и каталог запчастей

Страница: 15 / 34

15
When sweeping:

Weight and quantity of material for sweeping? The required power output increases with the
weight.

What is the working speed? The wear and tear and power output increases with the speed.
When mowing:

How long is the grass? The required power output increases with the length.

What is the working speed? The wear and tear and power output increases with the speed.
The following applies in general: the working speed must be lowered as the load increases. See
the specifications in section 1.0 for guidelines.
8. USING THE TURF TIDY
The following checks must be made before proceeding to use the Turf Tidy at a site:
1. Are there any freestanding objects on the field? Remove these first.
2. Are there slopes? This machine is only suitable for use on slopes with a maximum
gradient of 20 degrees.
Always work from the top to the bottom.
3. Are there are any airborne objects in the area, such as balls, which will distract the user
from the task at hand? If so, the Turf Tidy may
NOT be used.
4. Is there a slipping or sagging hazard? If yes, postpone the activities until the conditions
improve.
5. If the surface is wet, postpone the activities until conditions improve.
6. Do not make any sharp turns as this may cause damage to the surface.
7. Only tilt the collection tray when on a solid, level surface.
8. Never drive the Turf Tidy when the collection tray is not lowered.
9. During transport: Ensure that the head is facing upwards and is blocked to prevent
sagging.
10. During the use of the Turf Tidy in the working field can be chosen to put the locking pin
in the lower hole. In this situation the head will not directly be locked when lifted.