Redexim Turf Tidy 2300, Руководство пользователя и каталог запчастей

Страница: 23 / 34

23
14.0 TENSIONING V-BELTS TURF TIDY TILL SERIAL NUMBER C310212
1 2
3
4
5
A
Fig.13
The Turf Tidy is fitted with an adjustable belt tensioner that maintains the stress on the V-belts.
The drive line will be subjected to wear and tear through use.
Therefore, the V-belts may start slipping and require tightening.
The belt tensioner can be adjusted as follows
(See Fig. 13)
:
!! Ensure that that tractor/Turf Tidy is properly blocked and cannot move
independently !!
!! Ensure that the PTO shaft on the Turf Tidy has been disconnected !!
1. Remove all nuts 1 and the safety guard 2.
2. Loosen lock nut 3.
3. Loosen nut 4 slightly until the tension has just been released.
4. Adjust nut 5 and use this to adjust the tension on the V-belts by repositioning the belt
tensioner.
5. Check the V-belt tension by exerting pressure on point A with a tension of 3.5 kg (lbs). The
compression must be 4.5 mm (”). (Per belt)
6. Tighten nut 4.
7. Tighten lock nut 3.
8. Replace safety guard 2 and replace all nuts 1.