Redexim Rink DS3100CB, Руководство по эксплуатации

Страница: 28 / 28

Uneven flow rate Conveyor belt speed too slow Increase conveyor belt speed using
the controller (4)
(See page 10, Fig. 2)
Uneven
spreading pattern Spreading disks are set incorrectly Set the spreading discs (88)
correctly
(See page 14, Fig. 5)
Spreading width
is too narrow Spreading discs turn too slowly Increase spreading speed using the
controller (8) (see page 10 - Fig. 2)
Spreading
thickness to thin
or
Output quantity
too little Too little material is transported
Spreader speed set too high
Cross conveyor belt speed
too high
Conveyor belt speed too slow Increase gate opening
(see page 16 Fig. 6 and page 13 Fig.
3)
Reduce spreader speed using
controller (8)
(See page 10, Fig. 2)
Cross conveyor belt speed
reduce using controller (7)
(See page 10, Fig. 2)
Increase conveyor belt speed using
the controller (4)
(See page 10, Fig. 2)
Spreading
thickness too
thick
or
Output quantity
too much Too much material is transported
Spreader speed set too
slow
Cross conveyor belt speed
too slow
Conveyor belt speed too high Reduce the gate opening
(see page 16 Fig. 6 and page 13 Fig.
3)
Increase spreading speed using the
controller (8) (see page 10 - Fig. 2)
Cross conveyor belt speed
increase using controller (7)
(See page 10, Fig. 2)
Reduce conveyor belt speed using
the controller (4)
(See page 10, Fig. 2)
Brake does not
release Ball valve is closed Open ball valve (21) (see page 27
Fig. 13)
Fig.14: Troubleshooting
Electrical or hydraulic faults may only be inspected by qualified personnel.
No modifications may be made to the control cabinet, operating unit or
hydraulic block