Redexim Rink DS3100CB, Руководство по эксплуатации

Страница: 19 / 28

Change oil on the pump gearbox (every 100 operating hours)
(See page 21, Fig. 8)
- Unscrew filler plug (11).
- Release the drain plug (12) on the inside at the bottom and drain the oil.
- Screw in the drain plug (12) using a new gasket.
- Add 0.6 l of SAE85-W140 oil .
- Screw in the drain plug using a new gasket.
Change oil of the conveyor belt transmission (every 100 operating
hours)
(See page 21, Fig. 8)
- Unscrew filler plug (13).
- Release the drain plug (14) on the inside at the bottom and drain the oil.
- Screw in the drain plug (14) using a new gasket.
- Add 1.0 l of SAE85-W140 oil .
- Screw in the drain plug using a new gasket.
Change pressure filter (display via ERROR light)
(See page 21, Fig. 8)
- ERROR light flashes (see page 11 (9))
- ATTENTION Oil filter must be changed immediately
- Unscrew the filter housing (15) at the bottom.
- Replace filter element (16). Order no.: 10922
- Screw on the filter housing (15) at the bottom.
Used oil poses a danger to the environment; please dispose in
an environmentally friendly manner.
Setting cylinder stop of position switches
(See page 21, Fig. 8)
-
Adjust the position of the cylinder end stop by loosening the nut (34) so that the position
switch (33) is activated when retracting the cylinder, then tighten the nut (34) again
- Adjust the height of the cylinder end stop by loosening the nut (35) so that the position
switch (33) is activated when retracting the cylinder, then tighten the nut (35) again