Redexim Rink DS3100CB, Руководство по эксплуатации

Страница: 10 / 28

(1) POWER: ON/OFF switch of the controller
Indicator light (green) for operating voltage (continuous light)
ERROR - light (red) flashes briefly while the control starts up,
as soon as the light goes out, the control is ready for operation
(2) Selector switch for disc spreader or cross conveyor
Disc spreader mechanism: Spreading discs are activated
Position 0: Starting position (gate is or is being closed)
Cross conveyor belt: Cross conveyor is activated
(3) Switch for conveyor belt
Position ON: Gate opens, the conveyor belt starts after a delay
Position 0: Conveyor belt switches off, slide remains open
Position CLOSE GATE: Gate is closed as long as switch button is pressed
(4) Belt speed controller
(5) Switch for swivelling in and out of the cross conveyor belt
(6) Switch for raising and lowering the cross conveyor belt
(7) Speed controller of the cross conveyor
(8) Speed controller of the spreading discs
(9) ERROR - lights (red)
Blinking ERROR light Description Troubleshooting
continuous light:
When switching on the power
selector switch (2) and/or (3) is
pressed
Set selector switch (2) and/or (3)
to the zero position
Oil filter warning:
(to protect the system)
ERROR light goes out only
after the fault has been
attended to
Change oil filter
immediately
(see page 20)
EMERGENCY STOP is active
Unlock the EMERGENCY STOP
If several errors occur at once, the error with the highest priority is
displayed:
1. EMERGENCY STOP; 2. Oil filter; 3. Continuous light
(10) EMERGENCY STOP: Button for immediately stopping the system
ERROR - light flashes (red) as long as the EMERGENCY STOP button is pressed
(see (9)).