Redexim Rink DS3100CB, Руководство по эксплуатации

Страница: 11 / 28

SPREADING
Spreading using the disc spreader
The cross conveyor must be turned inwards and the fixation (55) must be locked
.
(See page 16, Fig. 6)
The control of the
DS3100CB RINK disc spreader
is switched on using the POWER switch
(1). For spreading using the disc spreader, set the selector switch (2) on the disc spreader;
this automatically activates the disc spreader. The conveyor belt and gate (66) are engaged
by turning the switch for the conveyor belt (3) to the ON position, wherein first the gate (66)
and then with a short delay the conveyor belt is activated. In the 0 position, the conveyor belt
can be switched off and in CLOSE GATE position the gate can be closed. Before starting
work, preselect gate position AG. (see page 10 Fig. 2 and page 13 Fig. 3)
Control elements
- (1) POWER: ON/OFF switch of the controller
Indicator light (green) for operating voltage (continuous light)
ERROR - light (red) flashes briefly while the control starts up,
as soon as the light goes out, the control unit is ready for operation (see page 10
Fig. 2)
- (2) Selector switch for disc spreader or cross conveyor
Disc spreader mechanism: Spreading discs are activated
Position 0: Starting position (gate is or is being closed)
Cross conveyor belt: Cross conveyor is activated (see page 10 Fig. 2)
- (3) Switch for conveyor belt
Position ON: Gate opens, the conveyor belt starts after a delay
Position 0: Conveyor belt switches off, slide remains open
Position CLOSE GATE: Gate is closed as long as switch button is pressed
(see page 10 Fig. 2)
- (4) Belt speed controller (see page 10 Fig. 2)
- (8) Spreading discs speed controller (see page 10 Fig. 2)
- (66) Gate (see page 13 Fig. 3)
- (77) Guide plate (see page 14 Fig. 4)
- (10) EMERGENCY STOP: Button for immediately stopping the system (see page 10
Fig. 2)
ERROR - light flashes (red) as long as the EMERGENCY STOP button is pressed
(see page 11 (9)).