Redarc MANAGER 30, Руководство пользователя

Страница: 31 / 40

3 USER GUIDE
3.6 Fault Display
Output battery over
temperature.
If The Manager30 detects a problem with the charging system that prevents it from
continuing to charge the battery, it will alert you via a ‘Fault’ screen and an alarm buzzer,
and will instantly terminate the charging cycle until the fault condition is cleared. The
screen will give a brief description of the problem and will allow you to select either
‘Clear’ or ‘Ignore’. Both options will clear the screen. After selecting ‘Clear’, however,
The Manager30 will immediately check to see if the condition still exists. If it doesn’t,
the unit will restart charging. Selecting ‘Ignore’ will simply hide the fault screen for up
to one minute. It will NOT allow The Manager30 to recommence charging unless The
Manager30 itself detects the removal of the fault condition.
If The Manager30 detects a problem with the charging system that does not prevent it
from charging the battery, it will alert you via a Warning screen and an alarm buzzer, and
continue charging. The screen will give a brief description of the problem and allow you to
select either ‘Clear’ or ‘Ignore’. Both options will clear the warning screen. After selecting
‘Clear’, however, The Manager30 will immediately check to see if the fault condition still
exists. If it does, it will display the warning screen again. Selecting ‘Ignore’ will prevent
The Manager30 from detecting the same fault for up to one minute.
NOTE: If “Ignore” is selected but the fault is not removed, when the warning re-appears
after one minute, it will not be accompanied by the alarm buzzer.
Page 31 contains a description of faults and warnings that can be detected by the
Manager30.
If a Distribution Box is connected the system can also detect faults with fusing, switching
and various connected devices.
30