RED ORCHIDEA HYDRO, Руководство по эксплуатации и обслуживанию

Страница: 30 / 56

red
PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL
page
30
Operation Technical service - Rights reserved - Reproduction prohibited
SET
TURBO
1
2
6 4
3
5
!
16 :
Ut 02
SET
TURBO
1
2
6 4
3
5
!
: 10
Ut 03
SET
TURBO
1
2
6 4
3
5
!
- - - -
set
SET
TURBO
1
2
6 4
3
5
!
+ 3
set
set
+ 3
4.5.
SETTINGS TO CARRY OUT BEFORE FIRST
LIGHTING
Set the main switch on the rear of the stove to position (I).
The display (8) of the control panel will show the message OFF and the
CURRENT TIME.
If the time shown is not correct, it can be reset by the procedure
described below.
You should keep in mind that the current time is only
needed when you carry out weekly programming
using the TIMER (see corresponding chapter). If the
time is not set correctly, this does not in any way
affect stove operation.
4.5.1.
SETTING CURRENT TIME
In rapid sequence, press the buttons

and

to access technical
parameter
UT01. If you again press the button 
, you will access item
UT02, which shows the hours. Use the buttons

or

to decrease or
increase the hours.
To confirm the hour selected and move on to selection of the minute,
press key

. (you will see the item
UT03)
Use keys

or

to decrease/increase the minute (steps of 1 minute).
To confirm the set time and exit, press

4.5.2.
Memorization of recipe on stove.
THE PROCEDURE FOR SELECTING THE RECIPE IS
ACTIVE ONLY WHEN THE STOVE IS NOT LIT.
Press in rapid succession, or simultaneously, the buttons

and

.
“SET” will appear on the display, alternatingly with the recipe number.
The recipes are +3;+2;+1;0;-1;-2;-3.
Alternatively, if the display shows the message "- - - -", it indicates that
no recipe is currently selected (first lighting).
To exit from the menu without making changes, press key

or key

, or wait 120 seconds without pressing a key.
To modify or set a new recipe, press the buttons

or

in order to
find the desired recipe according.
To confirm the selection you have made, you must
press the button

until the display once again
shows the time and the message “OFF”.
The default recipe for the stove is 0, for all versions
and for all countries.
SET
TURBO
1
2
6 4
3
5
!
day 1
Ut 01
Phase 2: To choose the desired recipe, press
the indicated button
First access to recipe selection menu
Phase 1: Example of access to recipe menu
and display of previous setting