RED EPIC MYSTERIUM-X, Руководство по эксплуатации

Страница: 164 / 192

Version 1.6.24 BETA
©2011 RED.COM INC. JULY 25, 2011
162 162
APPENDIX F: 3D SETUP / OPERATION
This section under construction.
CLIP NAMING CONVENTIONS
REEL NO. / SLATE (CAMERA ID) / CAMERA POSITION
Before shooting in Master / Slave or Master / Master configuration for a Stereo / 3D production, make
sure the Camera Slate (Reel No. and Cam ID) are set to the same value for both Master and Slave
cameras. Then change the Cam Pos value from the system default of CENTER, to either LEFT or RIGHT
to identify the "left eye" and "right eye" camera in the stereo pair.
The Reel No, Cam ID and Cam Pos can be set when formatting the media or after formatting by using
the SET option. Refer to SECONDARY MENUS > MEDIA.
NOTE: ****** are month xx + day xx + wildcard xx
When Master is set to LEFT, Slave is set to RIGHT and both Cam IDs are A, the first clip recorded is:
-
Master:
A001_L001_******.R3D
-
Slave: A001_R001_******.R3D
If Master and Slave are both accidentally set to CENTER and both Cam IDs are different (Master = A /
Slave = B), the first clip recorded is:
IMPORTANT: This position is NOT recommended when recording in Master / Slave configuration.
-
Master: A001_C001_******.R3D
-
Slave:
B001_C001_******.R3D