RED EPIC MYSTERIUM-X, Руководство по эксплуатации

Страница: 155 / 192

Version 1.6.24 BETA
JULY 25, 2011
©2011 RED.COM INC.
153
4. The REDmote will connect to the camera and display the cameras current settings and status. The
wireless connection will be shown in the lower Right corner of the REDmote screen.
5. The camera LCD or external monitors will confirm the REDmote is connected by displaying RM in
Green with a signal symbol next to it.
RECONNECT WHEN SIGNAL IS LOST
The REDmote keeps track of which camera it was last paired with for quick re-connect on next startup,
undocking, or loss of wireless signal.
When the camera is turned off, REDmote will display “Reconnecting” and the Green LED will flash (as
the REDmote attempts to connect with the camera after losing the cameras wireless signal) until the
REDmote is turned off or the camera is turned back on and REDmote automatically connects.
If Soft Menu Button 1 under CONNECT is pressed while the camera is off, the camera will display
“Searching” (Green LED will flash) and then go into IDLE state (“Idle” will be displayed on the camera
and the Green LED will stop flashing) if the camera is still off.
When the camera is turned back on, the REDmote will not automatically pair (if the REDmote is left
powered up or is powered up before the camera).
1.
To reconnect REDmote to the camera (assuming the camera and REDmote have been setup
wirelessly before) press Soft Menu Button 1 under CONNECT. The REDmote will display
“Searching”. When a camera is found, the REDmote will display the name and MAC address (in
parenthesis) of the camera.