8. Remove the exhaust fan pogo cover.
NOTE:
Store the exhaust fan pogo cover and the two (2) M2x0.4 x 4 mm cap screws in a safe place, in case you
want to remove or replace the top fans at a later time.
Figure: Remove Cover
INSTALL TOP FAN AND DSMC TACTICAL TOP PLATE 2.0
NOTE:
The top plate installation instructions below are also applicable to the original DSMC Tactical Top Plate that
was modified by RED to accommodate the top fan.
1. Ensure that the original Tactical Top Plate and exhaust fan pogo cover are already removed from the BRAIN.
For more information on removing the Tactical Top Plate and exhaust fan pogo cover, go to
Tactical Top Plate" on page 21
2. Place the BRAIN on a suitable flat work surface with the top of the BRAIN facing upward.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
2 3
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
