7. Remove the exhaust fan pogo cover.
NOTE:
Store the exhaust fan pogo cover and the two (2) M2x0.4 x 4 mm cap screws in a safe place, in case you
want to remove or replace the top fans at a later time.
Figure: Remove Cover
INSTALL TOP FAN AND TOP VENT SCOOP
1. Place the top fan assembly on top of the vent so that the “RED PRO” lettering is facing up and the connector is
facing down.
Figure: Align Top Fan
2. Attach the top fan to the BRAIN by installing two (2) M2x0.4 x 4 mm cap screws (included) with a T6 TORX driver
(included).
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
1 8
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
