C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
9
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
CHAPTER 2:
UPGRADE BOTTOM FAN
REQUIRED TOOLS
T10 TORX
®
driver
ESD-safe solder stick (included)
REMOVE CURRENT BOTTOM FAN
1. Turn off the camera.
2. Remove all power sources, accessories, the lens, and the lens mount.
3. Cover the camera opening with a DSMC
®
Front Body Cap to protect your sensor from dust and foreign particles
during the fan upgrade procedure.
4. Place the BRAIN
®
on a suitable flat work surface with the front of the BRAIN facing upward.
5. Use a T10 TORX driver to remove the two (2) M3x0.5 x 6 mm cap screws that attach the current fan grill to the
BRAIN.
Figure: Remove Cap Screws
