3. Place the top fan assembly on top of the vent so that the “RED PRO” lettering is facing up and the connector is
facing down.
Figure: Insert Top Fan
4. Attach the top fan to the BRAIN by installing two (2) M2x0.4 x 4 mm cap screws (included) with a T6 TORX driver
(included). DO NOT FULLY TIGHTEN.
Figure: Install Top Fan
5. Tighten the M2x0.4 x 4 mm cap screws evenly. DO NOT exceed 30 in-oz, or damage may occur.
WARNING:
DO NOT OVERTIGHTEN.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
2 4
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
