INSTALL TOP FAN WITH DSMC TACTICAL TOP PLATE
REQUIRED TOOLS
T6 TORX driver (included)
3/16" hex key
3 mm hex key
REMOVE DSMC TACTICAL TOP PLATE
1. Turn off the camera.
2. Remove all power supplies, accessories, and the lens.
3. Place the BRAIN on a suitable flat work surface with the top of the BRAIN facing upward.
Figure: Loosen M4x0.7 x 12.5 mm Captive Screws
4. Use a 3/16" hex key to loosen the two (2) 1/4-20 x 12 mm screws.
5. Continue to loosen all screws until the plate can be removed.
C O PYR I G HT © 2 0 1 9 R ED.C O M , LLC
9 5 5 - 0 0 1 2 , R EV - N
|
2 1
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
