Red Hat NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT, Справочное руководство

Страница: 222 / 300

Option Description
--enable-all Allow rhncfg-client to do everything.
--enable-run Enable script.run
--disable-deploy Disable deployment.
--disable-diff Disable diff
--disable-upload Disable upload
--disable-mtime-upload Disable mtime upload
--disable-all Disable all options
--disable-run Disable script.run
--report Report whether the modes are enabled or disabled
-f, --force Force the operation without asking first
-h, --help show help message and exit
Table A.1.
rhn-actions-control
options
Once a mode is set — and for many,
rhn-actions-control --enable-all
is common — your
system is now ready for config management through RHN.
2. Red Hat Network Configuration Client
As the name implies, the Red Hat Network Configuration Client (
rhncfg-client
) is installed
and run from an individual client system. From there you may use it to gain knowledge about
how RHN deploys configuration files to the client.
The Red Hat Network Configuration Client offers these primary modes: list, get, channels,
diff, and verify.
2.1. Listing Config Files
To list the configuration files for the machine and the labels of the config channels containing
them, issue the command:
rhncfg-client list
The output resembles the following list:
Config Channel File config-channel-17 /etc/example-config.txt
config-channel-17 /var/spool/aalib.rpm config-channel-14 /etc/rhn/rhn.conf
These are the configuration files that apply to your system. However, there may be duplicate
files present in the other channels. For example, issue the following command:
Appendix A. Command Line Config Management Tools
208