Red Hat NETWORK SATELLITE 5.1.0 - CHANNEL MANAGEMENT, Справочное руководство

Страница: 194 / 300

system for your virtual guest and registered it to you Satellite.
1.2.3. Your Host System Has Red Hat Enterprise Linux 5 Installed
You should register your host system to your Satellite and check to see if the required
xen
packages are installed on the system. If they are not, install them using the Satellite
1. Fist, register your host system to your Satellite. Use
ssh
to connect to your host system.
Register your host system to your satellite issuing the following command as root:
rhnref_ks --serverUrl=http://your-satellite.example.com/XMLRPC \
--username=username --password=password
Note
If your host system is already registered to a different Red Hat Network server,
add the
--force
to the command above.
2. Next, open up the host system's profile in the Satellite web interface. Log into the web
interface of your Satellite at https://your-satellite.example.com/. Click on the Systems tab in
the top red navigational bar. You should see the host system you just registered - click on its
profile name to access its system profile page.
3. Make sure your system has access to the software channels it needs to access the software
required for hosting virtual guests. From your host system's profile page, click on the Alter
Channel Subscriptions link in the upper right side of the profile page under the Subscribed
Channels header. Check the RHEL Virtualization and Red Hat Network Tools for RHEL
Server checkboxes and click the Change Subscriptions button underneath the list of
channels.
4. Next, check to see if you have the necessary software installed for hosting virtual guest on
the system. On the host system, issue the following command as root:
rpm -q xen kernel-xen rhn-virtualization-host
If
rpm
indicates these packages are not installed, you must install them by running the
following command as root on the system:
yum install dxen kernel-xen rhn-virtualization-host
Chapter 8. Virtualization
180