Red Bull Racing RB-RTEN10-104F, Руководство пользователя

Страница: 15 / 160

15
E08 Over-temperature protection.
It is usually over-temperature with the
controller, due to continued travelling on slopes
or overload for a long time. The initial protection
will limit current output and will not generate
error code. If the temperature continues to rise,
it will trigger the alarm and cut the electricity.
Speedometer
E09 Throttle failure.
It is because the throttle signal does not enter
the speedometer. The major reason is the one of
the three cables in connector has bad contact or
misplacement of the terminal. It might also be
due to non-wetting. You shall consider a
throttler or speedometer replacement.
E10 Brake failure.
The major reason is the bad contact between
brake and throttler or between brake and
speedometer, it is found the possibility of Hall
failure in throttler also. You shall adjust the
connector pin to ensure the connection or
replace the speedometer and throttler. In
normal case, the initial voltage signal is around
0.88V, after Hall throttler connects to 5V power
supply, or after vehicle turns on.
E11 Headlight switch malfunction.
This error is not valid for the current model.
E12 Communication failure.
It is usually due to bad contact for main cable or
connector clips and open circuit. The easiest
way is to change a main cable. If it is not
workable, you shall check whether open circuit