Record C 127 SU OFFSET, Руководство пользователя

Страница: 29 / 32

Malfunctions
7
BAL_C127-SU_OFFSET_EN_1V0_REC_121-006454770 29 / 32
7 Malfunctions
7.1 Status displays
Malfunctions are shown on the LCD display. If there is a malfunction, the display changes between
light and dark, as shown in the following figure. Multiple malfunctions can be displayed, e.g. 1 / 2. If
there are multiple malfunctions, they are numbered as follows.
AKI > active
3
AKI > active
3
Step Button Operation Function Display on LCD
1.
E
Press button 1 x Return to the main
menu for 4 seconds
Automatic
Malfunction display for primary / secondary operator
It is possible to switch between the malfunction display of the primary / secondary operator
The main view is returned to by scrolling through the malfunction displays.
Step Button Operation Function Display on LCD
1.
E
Press button 1 x Scroll through the
malfunction displays
AKI > active
Temp. motor 1
38 master
AKI > active
1/2
2/2
7.2 Troubleshooting
The following malfunctions on the door can only be rectified if an electronic control panel with display
is present.
Malfunction Cause Measure Personnel
Display shows a malfunction mes-
sage. Malfunction present Restart controller and/or
control panel. System operator
Door does not work. No power connected. Check power connection System operator
Incorrect operation mode se-
lected. Check operation mode. System operator
Status LED flashing Restart controller and/or
control panel. System operator
Malfunction message on the
display of the Restart controller and/or
control panel. System operator
Defective Close the door manually
and notify a service engin-
eer. System operator