RECO RM-310 C, Инструкции по эксплуатации и монтажу

Страница: 3 / 41

Documentation RM-310 C / RM-310 CT / RM-310 C Plug and Play / RM-310 CT Plug and Play
RDN 10001104
3
14.07.2020
1 Safety instructions
The filter controls RM-310 C / RM-310 CT or RM-310 C Plug and Play / RM-310 CT Plug and
Play carry hazardous electrical voltage when connected to the mains. Improper installation of
the connected electrical equipment may cause device failure, serious or even fatal injuries. In
addition to general safety rules for equipment in industrial electrical installations, pay particular
attention to the following points:
The equipment must only be installed by qualified persons according to the provisions of the
standards IEC 364 and DIN VDE 0105 for electrical equipment.
All applicable laws, conditions, rules and regulations governing the installation of electrical
equipment must be observed.
Equipment with protection rating IP00 without covers must only be configured by authorised ex-
pert staff when disconnected and whilst observing the local safety and accident prevention
rules.
The filter controls RM-310 C / RM-310 CT or RM-310 C Plug and Play / RM-310 CT Plug and
Play must only be operated within the permitted application range.
Switch off the supply voltage before replacing the filter controllers or components connected to
them. Failure to do so may cause equipment damage.
Symbol explanation
Warning of physical and health hazards or damages to the product and other properties.
Important note