- 19 -
After the PTZ is connected and parameters are set, you shall select the channel connected to the
PTZ before using the remote control to control the PTZ. For example, if the PTZ is connected to
Channel 2, then you can control it only after switching the monitoring interface to Channel 2
and maximizing it.
The second method is to directly connect the RS485 control cable of the PTZ to 3D control keypad,
connect to the video cable to the mainframe video input to power the PTZ and 3D keypad, and then set
keypad parameters corresponding to the PTZ. Thus you can use the 3D keypad to control the PTZ, with
higher speed and efficiency than the remote control.
The third method is to combine these two connection methods by connecting both vehicle mainframe and
3D keypad to control the rotation of the PTZ to realize even remote control.
2. Connection Method of This Solution
