- 18 -
two-way radio supporting RS232 according to actual requirements. Before installation, firstly connect the power
cord and communication cable of the external device to the supplied 24pin I/O port, and then to 24PIN I/O port
on the rear panel of the
MobileMule™
Finally, install the probe for the external device and keep cables well
arranged. The following shows the schematic connection diagram:
Step 12: Connect PTZ
There are three methods for connecting PTZ in terms of PTZ control method:
The first method is connect the RS485 control cable of the PTZ to the RS485A and RS485B of the main
frame, connect the video cable to the mainframe video input, and then power the PTZ. At the same time,
configure the PTZ setting corresponding to PTZ data under the peripheral setup option to use the remote
control to control the PTZ.