RealMan RM75-B Скачать руководство пользователя страница 67

Страница: 67 / 85

RealMan (Beijing) Intelligent Technology Co., Ltd.

图

8-53 Align the mark of joints.

4. Click the “Set” button on the upper right to complete the origin setting of

joint 1.

5. Click the “Enable” button.

Fig. 8-54 Setting the origin position of a joint.

2. TCP Speed Limit

This feature includes the linear velocity, linear acceleration, angular velocity and

angular acceleration at the end of the robot arm. After the network connection between

the teaching software and the robot controller is established, this feature will

automatically update the TCP parameters of the current robot, and the user can

manually modify the parameters and send them as well.

Click the default value button, and the robot TCP parameter will be set to the default

value. End linear velocity: 0.1m/s, end acceleration: 0.5m/ s

, end angular velocity:

0.2rad/s, end angular acceleration: 1rad/ s

3. Collision Protection Rating

This part introduces the settings of the collision level of the robot arm. The level is 0-

Содержание RM75-B






















































































Результаты поиска

Содержание RM75-B

Отзывы:

RealMan RM75-B, Руководство пользователя, Страница: 67 / 85

Результаты поиска

Содержание RM75-B

Отзывы: