Copy
Size
А4
Page
EN.000 RE
6
Chg. Page
Doc. #
Sign.
Date
Si
g
n
.
a
n
d
d
a
te
Re
p
.
ta
g
#
In
s
t.
o
f
ta
g
#
Si
g
n
.
a
n
d
d
a
te
а
Sc
ri
p
t
tag
#
4 There are two formats of data representation: 16 and 10; 12 bits. Capacity 10 or 12
bits is defined by programming controller. Default value is12 bit.
5 For both of two axes (lateral and transversal).
6 External FLS connections are possible for model EN6 only. For other models it is
possible to use internal calibration chart only. Quantity of external connected FLS
depends on ports functionality. If port RS-232 is mapped, maximal possible quantity
of connected external FLS is 1, otherwise (port RS-485) – 7.
7 Total amounts of calibration chart records could be distributed randomly between
any FLS. Calibration chart of any FLS could be absent (no records) or all records
could be belonged to single FLS.
Total amount of all FLS calibration chart records couldn't be more than 960.
If FLS doesn’t contain calibration chart for actual volume estimation, actual level
and volume of the tank are applied.
8 For the model EZ the parameter is shown for simultaneous usage of the FGU and
electrical protection unit BIZ-EZ.
9 Impulse parameters comply with requirements of State Standard 28751-90 (ГОСТ
28751-90) (unit class А, degree of fixity 3 for 24 V of supply-line voltage).
10 Exposure time is up to 1 second. For EZ model unit– voltage difference between
signal ground of spark protection block and measuring head cabinet.
11 For EZ model unit concurrent operating is possible by single interface only.
12 Other modifications of flange are possible by agreement with the customer.
13 Except packing washer.
14 Total weight of the sensor depends on the length and modification of its fuel prob.
