Copy
Size
А4
Page
EN.000 RE
27
Chg. Page
Doc. #
Sign.
Date
Si
g
n
.
a
n
d
d
a
te
Rep
.
ta
g
#
In
s
t.
o
f
ta
g
#
Si
g
n
.
a
n
d
d
a
te
а
Sc
ri
p
t
tag
#
Fig. 4.1 Partial disassembling of fuel level sensor и and installation of cover-
plug
-
to upload new configuration data in new measuring head (see appendix В
of the document "EN.000 ИМ. Installation manual");
-
to install and connect new measuring head, to perform sensor sealing
according to requirements of 1.1.5.2.
4.2.1.2 In case if configuration data was lost, it is necessary to perform
operations on sensor configuration, described in appendix В of the document
"EN.000 ИМ. Installation manual". If configuration data was successfully restored,
then re-calibration of the tank is not required.
4.2.2
Probe string replacement
If it is necessary to replace the string, the following operations should be
performed:
-
To disconnect measuring head from the probe, having performed
operations, described in the relevant section of the document "EN.000 ИМ
.
Installation manual " in reverse order;
-
To disconnect the string in lower part of the probe, having removed plug-
cap, and in the upper part of probe, as shown on fig.
4.3;
