LB METRO
59
Troubleshooting
Fault
Cause
Remedy
Squeegee does not dry perfectly
Squeegee rubber blades worn
Squeegee fouled
A foreign body has become jammed in
the squeegee
Suction line fouled
Squeegee not properly adjusted
Water drain line tap open
Suction motor burnt out
Suction motor brushes worn
Squeegee not lowered at start. Actuator
faulty
Filter inside suction motors fouled
Replace blades
Clean squeegee
Remove the foreign body
Clean the line
Adjust the angle (fig. 5)
Close properly
Replace the motor
Replace the brushes
Replace the actuator
Clean the filter (fig. 11)
The detergent solution is not flowing out
evenly onto the brushes
Pipelines which supply water to the
brushes are fouled
Solution filter clogged
Clean the fouled pipe
Clean the solution filter
The detergent solution does not reach
the brushes or only a little is reaching
them
Pipelines which supply water to the
brushes are fouled
Solution outlet tap not opening
Solution filter clogged
Closing electromagnet seized or pipe
crusched
No water in tank
Clean the fouled pipe
Check the tap
Clean the solution filter
Replace the electromagnet or
restore or replace the pipe
Fill tank with water
The machine does not clean properly
Brushes too warn
Brushes applying too little pressure to
the floor due to poor operation of the
trimmer on the dashboard
Replace the brushes
Replace the trimmer
Содержание 33.LB.Metro
Страница 2: ......
Страница 70: ...LB METRO 68 ...