12
ENGLISH
1
LCD DISPLAY
See the 'TX 4000 / PX 4100 transmitter operation' manual section for detailed
information.
2
CH/ON key
Press and hold (for a few seconds) this key to turn the transmitter on / off.
When the transmitter is switched on, press once or more times to select the parameter to
edit:
- C H.
channel selection
- G P.
group selection
- P L.
RF power level
- Unlock / Lock
Press once or more time the SELECT key
3
to change values.
After a few seconds since the last setting, the display will show the current selected
frequency [MHz] and the battery life.
3
SELECT key
Press once or more time to change values when editing parameters.
Press and hold (for a few seconds) to mute / unmute the transmitter.
4
INPUT (mini 4P connector)
Input for the LA 2004 'Lavalier' (tie-clip) electret microphone.
PIN
1.
ground
2.
power supply for electret microphones
3.
audio signal input for an electric guitar / bass
(a cable with jack - mini 4p connectors is needed, NOT included in RCF kits)
4.
audio signal input for a microphone
5
BATTERY COMPARTMENT
Use 2 non-rechargeable ‘AA’ type (1.5 V) batteries, better if alkaline and new.
Pay attention to the polarity when inserting the 2 batteries.
6
BELT CLIP
7
FLEXIBLE ANTENNA
n
ote
:
avoid
covering
the
antenna
with
hands
,
clothes
,
etc
.
1
4
3
2
PIN
PX 4100 BODY PACK TRANSMITTER
4
1
7
2
3
5
6
