9
ENGLISH
RX 4016 OPERATION
1
Selected frequency group (1 ÷ 12)
2
Selected channel (1 ÷ 12)
3
Mute function
4
Frequency (MHz) corresponding to the selected channel
5
Transmitter remaining battery life
6
AF: bar graph indicating the received audio level
7
RF: bar graph indicating the field strength of the received radio signal
AUTO-SCAN
Press and hold the MEM
5
key for one second to start the auto-scan function, which
automatically searches the current transmitter carrier frequency in the entire band.
During the search, the display shows the channel sequence and the audio output
is muted. As soon as the transmitter frequency is found, the scan will be stopped
automatically and the current channel / frequency will be flashing. At this point, press the
MEM key to store the new channel.
N
ote
:
in
some
cases
,
it
may
be
necessary
to
select
the
channel
manually
(
see
the
next
‘m
anual
channel
selection
’).
MANUAL CHANNEL SELECTION
Press the MENU
4
key: on display ‘GROUP’ is now flashing and it is possible to
select the group through the UP
2
/ DOWN
3
keys.
When the group is set, press the MEM
5
key to store the new setting (or the MENU
4
key to cancel).
Then press the MENU
4
key twice (sequentially): on display ‘CHANNEL’ is now
flashing and it is possible to select the channel through the UP
2
/ DOWN
3
keys.
When the channel is set, press the MEM
5
key to store the new setting (or the
MENU
4
key to cancel).
AUDIO OUTPUT LEVEL ADJUSTING (balanced audio output
7
only)
Press the MENU
4
key 3 times (sequentially): the display indicates ‘PL’ and a value.
Use the UP
2
/ DOWN
3
keys to adjust the receiver (max.) audio output level:
-
PL 0 500 mV
-
PL 1 300 mV
-
PL 2 150 mV
Press the MEM
5
key to store the new setting (or the MENU
4
key to cancel).
N
ote
:
this
parameter
only
affects
the
balanced
audio
output
7
.
DISPLAY
DISPLAY
AUTO-SCAN
MANUAL CHANNEL
SELECTION
AUDIO OUTPUT LEVEL
ADJUSTING
9 10
9 10
821.325
MHz
7
4
2 3
1
6
5
GROUP
CHANNEL
AF
RF
PL 1
821.325
MHz
AF
RF
