11
ENGLISH
Remove (unscrew) the microphone handle to access the battery compartment
5
.
1
MIC. CAPSULE GRILLE
Extremely rugged spring steel mesh grille to protect the capsule underneath in live
performances.
2
LCD DISPLAY
See the ‘TX 4000 / PX 4100 transmitter operation’ manual section for detailed
information.
3
CH/ON key
Press and hold (for a few seconds) this key to turn the transmitter on / off.
When the transmitter is switched on, press once or more times to select the parameter to
edit:
-
C H.
channel selection
-
G P.
group selection
-
P L.
RF power level
-
Unlock / Lock
Press once or more time the SELECT key
4
to change values.
After a few seconds since the last setting, the display will show the current selected
frequency [MHz] and the battery life.
4
SELECT key
Press once or more time to change values when editing parameters.
Press and hold (for a few seconds) to mute / unmute the microphone.
5
BATTERY COMPARTMENT
Use 2 non-rechargeable ‘AA’ type (1.5 V) batteries, better if alkaline and new.
Pay attention to the polarity when inserting the 2 batteries.
6
ANTENNA
The antenna is integrated in the transmitter, under the coloured plastic cap (that is
available in 7 different colours for easy identification).
TX 4000 TRANSMITTER / HANDHELD
DYNAMIC MICROPHONE
1
2
4
3
5
6
