14
ENGLISH
CHANNEL SELECTION
The frequency range is in the UHF band (798 MHz ÷ 827 MHz).
Before setting a different channel, please see the table (groups, channels and respective
frequencies) in the 'Frequency' manual section.
For instance, to select the frequency preset of 821.325 MHz (group 9, channel 10), please
follow the following procedure:
-
Turn the transmitter on first.
-
Press CH/ON key
2
once to edit the channel parameter, then press once or more times
the SELECT key
3
to specify the proper channel (example: no. 10).
-
Press the CH/ON key
2
once again to edit the group parameter, then press once or
more times the SELECT key
3
to specify the proper group (example: no. 9).
After a few seconds, the last setting will be automatically stored and the display will
show the (new) selected frequency and the battery life again.
RF OUTPUT POWER SELECTION
Press CH/ON key
2
3 times to edit the RF output power, then press once or more time
the SELECT key
3
to change values.
SELECTION
PL 0
PL 1
PL 2
TX 4000 / PX 4100 RF OUTPUT POWER
1 mW
3 mW
10 mW
After a few seconds, the last setting will be automatically stored and the display will
show the selected frequency and the battery life again.
LOCK FUNCTION
Since the CH/ON and SELECT keys may be accidentally pressed, it is possible to protect
the current settings thanks to the 'lock' function.
When the transmitter is set to 'lock', it is still possible to use the CH/ON key to select
parameters, but only the 'Unlock / Lock' can be edited.
Press CH/ON key
2
4 times to edit the 'Unlock / Lock' parameter, then use the SELECT
key
3
to select.
After a few seconds, the last setting will be automatically stored and the display will
show the selected frequency and the battery life again.
CHANNEL SELECTION
C H. 10
G P. 9
P L. 2
LOCK FUNCTION
