RCF BM 3023, Руководство пользователя

Страница: 9 / 44

9
ENGLISH
Devices having higher priority can interrupt an announcement in progress (or
prevent it) from a BM 3023 paging microphone.
This event is indicated by the LEDs:
ON / BUSY
LED
1
red
The green LED
2
indicating the call type is either lit (if the call type has been
previously selected) or off.
When paging, the
TALK LED
4
turns off due to the new event with higher
priority.
t
he
talk led
4
will turN oN
(
after pressiNg the
talk
buttoN
5
)
if the
bm 3023
pagiNg microphoNe has higher priority thaN aNother device previously activated
;
later
,
it
may turN off due to aNother eveNt haviNg higher priority
.
‘o
ther devices
’:
Not beloNgiNg to the same liNe of the used
bm 3023
pagiNg microphoNe
.
The busy state is signalled by the ON / BUSY
1
indicating red.
A BM 3023 paging microphone can be enabled or not according to the DXT
9000 system settings and status.
Try anyway to activate the BM 3023 paging microphone: select the desired call
type (by pressing one of the respective push-buttons
3
), then press and release
the
TALK
button
5
(or keep pressed the handheld microphone push-button)
and wait for the confirmation.
It is possible to page only if the BM 3023 has a higher priority level then the
other device that is engaging the system.
If so, the microphone is immediately turned on. If not, the request is denied
(the
TALK LED
4
blinks for 5 seconds, then the selection is cancelled and the
TALK LED
4
turns off).
Engaged line: it is not possible to page,
unless the BM 3023 paging microphone has
a higher priority.
N
ote
:
if the
led
was previously iNdicatiNg greeN
,
aNother device has muted the
bm 3023
pagiNg
microphoNe
.
PAGING WHEN THE SYSTEM IS BUSY
DUE TO OTHER DEVICES
PAGING INTERRUPTED BY OTHER DEVICES
(in other lines) HAVING HIGHER PRIORITY