RCF BM 3023, Руководство пользователя

Страница: 25 / 44

5
ENGLISH
All connectors are placed on the rear panel, for easier cabling in any configuration.
On the front panel status and power supply LEDs are placed.
TWIN MODE SETTING
To set the TWIN mode, remove the metal case cover.
Then, looking at the electronic board of the device, short:
- TW CMD INPUT jumper to twin the CB 3002 with the previous one in the chain;
- TW CMD OUTPUT jumper to twin the CB 3002 with the next one in the chain;
- Both jumpers TW CMD INPUT and OUTPUT to twin the CB 3002 both with the previous
and next ones in the chain.
GENERAL CALL, TWIN CALL e LOCAL CALL LEDs indicate which type of call is activated on BM 3023.
The POWER SUPPLY indicates device correct power supply.
8 poles connectors for CB 3002 chain INPUT and OUTPUT. The last CB 3002 shall be
connected to system’s Master Unit. They transport both audio and commands.
4 poles connectors to system’s Amplifiers Units. They transport both audio and commands.
RJ45 connector to BM 3023.Use CAT5 (or higher) cables only.
AC AD2405 power supply connector.
1
2
3
4
5
6
DIMENSIONS AND
DEVICE ELEMENTS