manualshive.com logo in svg

RCF AX 8042, Руководство пользователя

Поделиться
Скачать
RCF AX 8042 Скачать руководство пользователя страница 44

44

ENGLISH

AVAILABLE COMMANDS

COMMAND

RETURN (in case of no error)

SYSTEM 

MODEL

0 <MODEL_ID> [<TEXT>]
where:
<MODEL_ID> is an integer from 1 to 32
(e.g. 1: ‘AX 8042 Automixer’, 2: ‘ZX 8060 Zoner’,
 3 to 2: reserved for future use).
<TEXT> is an optional field and may include a description (a text with max. 40 
characters) of the unit delimited by characters “ ”.

IO_SIZE

0 <input number> <output number>
The count also includes both inputs and outputs of the SLAVE unit (if connected).

GET_PRES

0 <current preset>
It returns the current preset. Allowed values start from 0.

SET_PRES <n>

0
The response code is returned at the end of the preset change.
It can take a few seconds.

CHANNEL 

GET_MUTE <which>

0 <flag>
Flag: 0 = the channel is NOT MUTED, 1 = the channel is MUTED.

The MUTE table is partitioned as follows:
0÷63 single channels, 64÷127 MUTE groups.
MUTE map, <which>:
  0 ÷   7  MASTER inputs
  8 ÷ 15  SLAVE inputs
16 ÷ 21  MASTER outputs
22 ÷ 27  SLAVE outputs
64 ÷ 79  MUTE groups (AX 8042)
64 ÷ 95  MUTE groups (ZX 8060).

SET_MUTE <which> <flag>

As above

GET_LEVEL <which>

0 <value>
Value field format:
    0 ÷   75 = –90 ÷ –30 dB
  76 ÷ 100 = –30 ÷ –20 dB
101 ÷ 255 = –20 ÷ +10 dB

The LEVEL table is partitioned as follows:
0÷63 single channels, 64÷127 CONTROL groups.
LEVEL map, <which>:
  0 ÷   7  MASTER inputs
  8 ÷ 15  SLAVE inputs
16 ÷ 21  MASTER outputs
22 ÷ 27  SLAVE outputs
64 ÷ 79  CTRL groups (AX 8042)
64 ÷ 95  CTRL groups (ZX 8060).

SET_LEVEL <which> <value>

As above

Содержание AX 8042

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды