manualshive.com logo in svg

RCF AX 8042, Руководство пользователя

Поделиться
Скачать
RCF AX 8042 Скачать руководство пользователя страница 34

34

ENGLISH

FORCE ON/OFF

This function allows to either increase (

FORCE ON

) or reduce (

FORCE OFF

) an input 

level forcedly.

Its activation can be either automatic (when the audio input signal level is above the 
noise gate threshold) or through an external command linked to a logic input (GPIN).

Click 

FORCE ON/OFF

 in the main window.

When the SLAVE unit is available (linked to the MASTER unit), there are two FORCE ON/
OFF tables:

 

-

The first with all the 16 audio inputs that refers to the MASTER unit output.

 

-

The second with all the 16 audio inputs that refers to the SLAVE unit output.

Before editing any setting, always check (on the far right of the software main window) 
which unit (MASTER or SLAVE) is selected.

AUDIO INPUT SETTINGS

SOURCE

Activation mode choice:

 

-

GPIN

: through a logic input (GPIN, to be set to either FORCE ON or  FORCE OFF).

 

-

VOX

: automatic, when the audio input signal level is above the noise gate threshold.

FORCE ON

: sets how much (up to +20 dB) the audio signal level will be increased 

during a FORCE ON event.

FORCE OFF

: sets how much (up to –20 dB) the audio signal level will be reduced during 

a FORCE OFF event. 

n

ote

: 

the

 

use

 

of

 force on / force off 

faders

 

is

 

exclusive

 

(

the

 

adjustment

 

of

 

one

 

clears

 

the

 

setting

 

of

 

the

 

other

). 

AUDIO INPUT SETTINGS

Содержание AX 8042

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды