RCF AX 8042 страница 39 Скачать руководство пользователя

Страница: 39 / 48

ENGLISH

GENERIC SETTINGS

Mode:

operating mode selection among

static, dynamic,

combined

Before selecting the combined mode, first it is
necessary to set the remote control in both static
and dynamic modes.

Enable

: toggles the remote control (keep it on when using).

STATIC MODE SETTINGS

Click one of the 8

T1-T8

buttons to configure it.

Choose the

Function

(to be assigned to the selected button, e.g.

) and the preset

number, the audio input / output or the group (to match the function) through the

Preset/Channel

parameter:

NONE

: disabled button.

PRESET RECALL

: recalls the selected preset.

MUTE INPUT:

mutes the selected audio input.

MUTE

OUTPUT

: mutes the selected audio output.

MUTE

GROUP

: mutes the selected group.

MUTE

ALL

: mutes all audio outputs.

Click the

SCROLL WHEEL

to configure it.

Choose the

Function

and the audio input / output or the group (to match the function)

through the

Preset/Channel

parameter:

INPUT LEVEL

: adjusts the level of the selected audio input.

OUTPUT LEVEL

: adjusts the level of the selected audio output.

GRP LEVEL

: adjusts the level of the selected group.

DYNAMIC MODE SETTINGS

In the dynamic mode, it is possible to assign:

Either an audio input or a control group to each of

T1-T4

buttons.

Either an audio output or a control group to each of

T5-T8

buttons.

Click one of the 4

T1-T4

buttons and choose either an audio input or a control group

through the

Preset/Channel

parameter.

Click one of the 4

T5-T8

buttons and choose either an audio output or a control group

through the

Preset/Channel

parameter.

COMBINED MODE

In the combined mode there are no parameters to be set.

Before selecting the combined mode, first it is necessary to set the remote
control in both static and dynamic modes.

GENERIC SETTINGS

STATIC MODE SETTINGS

DYNAMIC MODE SETTINGS

COMBINED MODE

Содержание AX 8042

















































Результаты поиска

Содержание AX 8042

Отзывы:

Похожие инструкции для AX 8042

Бренды по названию

Популярные бренды

RCF AX 8042, Руководство пользователя

Результаты поиска

Содержание AX 8042

Отзывы:

Похожие инструкции для AX 8042

Бренды по названию

Популярные бренды