manualshive.com logo in svg

RCF AX 8042, Руководство пользователя

Поделиться
Скачать
RCF AX 8042 Скачать руководство пользователя страница 33

33

ENGLISH

CONTROL GROUP 

CTRL GROUP (n):

 group name that can be 

edited after a double-click on the text. 

EDIT

: opens the window of audio input / output 

selection.
The green light beside (when lit) means that at least one input / output has been selected 
(if the light is off, the group has not been configured yet).

FADER

: group level control (default setting: 0 dB). The level can be adjusted by moving 

the fader (by dragging it with the mouse left button) or directly changing its value (click 
the number and then insert the new value with the numeric keyboard).  

ENABLE

: toggles the group (keep it on when using). 

MUTE GROUP 

MUTE GROUP (n):

 group name that can be edited after a double-click on the 

text. 

EDIT

: opens the window of audio input / output selection.

The green light beside (when lit) means that at least one input / output has been selected 
(if the light is off, the group has not been configured yet).

ENABLE

: toggles the group (keep it on when using).

ASSIGNMENT OF AUDIO INPUTS AND OUTPUTS TO A GROUP

Click 

EDIT

 of either a CONTROL or MUTE group to open the 

window of audio input / output selection.

MASTER INPUTS

: click checkboxes to select the MASTER unit 

audio inputs to be included in the group.

SLAVE INPUTS

: click checkboxes to select the SLAVE unit 

audio inputs (if available) to be included in the group.

OUTPUT

: click checkboxes to select the audio outputs (of either the MASTER or SLAVE 

unit currently selected) to be included in the group.

DESELECT

: clear all checkboxes.

After selecting audio inputs and outputs, close the window (by clicking the X in the top 
right-hand corner).

CONTROL GROUP 

MUTE GROUP

ASSIGNMENT OF AUDIO INPUTS 

AND OUTPUTS TO A GROUP

Содержание AX 8042

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды