Series 1780 Dynamometer User Manual V1.1
Document ID: Q2D4F5
Publish date: 2020-03-06
Chapter 1: Introduction
This is the user manual for customers who purchased the Series 1780 Dynamometer
75kgf-500A. The goal of this manual is to demonstrate all important information about
preparing, assembling and using this dynamometer. If you need the user manual for the
original Series 1780 Dynamometer 25 kgf V1 or the Series 1780 Dynamometer V2 25kgf-100A or
40kgf-150A, please contact us.
The user manual of the Series 1780 is regularly updated. To ensure you have accurate
information up to date information, please download the latest PDF copy from our website:
https://rcbenchmark.gitlab.io/docs/en/
IMPORTANT!
We highly recommend that all operators who will be working with this machine carefully
read this user manual in its entirety before carrying out any operation on the Series 1780.
Please note that not following the instructions in this user manual may result in testing
errors, malfunction of the dynamometer, serious injuries, or death of the operator.
In this manual, any text following a # represents the RCbenchmark SKU# for this item. You
may refer to this number to order spare parts.
The Series 1780 dynamometer contains several major units: the load measurement units, the
power and control console, the main board, and the fixtures. Every box may contain one or
multiple bags of fasteners. Please keep them in boxes until you need to use them.
The load measurement unit, the 75kgf-40Nm A side (#FVET) is extremely sensitive to any
external forces outside its rated output. The load measurement unit comes with a protective
shell in its own boxes. Do not take it out until you need to mount it onto the support.When
you unmount the load measurement unit from the support, please place it back into the
protective casing. For further information about how to store and keep a valid warranty on
this unit, please refer to section 4.2.1 of this manual.
Copyright 2019 - Tyto Robotics Inc.
Page 5/65
