Chapter 2: Using the Remote Control
14
Chapter 2
The Buttons on the Remote Control
(0-9) Number Buttons
Enter channel numbers and time settings directly through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits. To enter
a three-digit channel, press and hold the “1” button until “1” and two dashes (– –) appear, then add the
second two digits. Example: to tune to channel 123, press and hold 1 until “1– –” appears, release the 1
button and then press 2 and 3.
Arrows
Used to point to different items in the TV or DVD menu and to adjust the menu controls. Moves
the PIP window when no menus are on the screen. Also switches the two POP windows when no menus
are on the screen. For Zoom use, go to next page.
AUX
Puts the remote in AUX mode. Can also be programmed to operate most brands of an additional
remote-controllable component.
Backlight
Lights up some of the buttons in the dark.
CH + or CH -
In TV mode, scans up or down through the current channel list. Press once to change the
channel up or down; press and hold to continue changing channels. In DVD mode while a disc is playing,
CH+ advances to the next chapter; CH- goes to the preceding chapter.
CH+ or CH- PIP
When using PIP or POP, changes the channel in the picture window.
CLEAR
Removes any menu or display from the screen and returns you to normal viewing.
DISC MENU
In DVD mode while a disc is playing, brings up the DVD Disc menu.
DVD
Turns on the DVD and puts the remote in DVD mode. Also displays current DVD status.
FORWARD
In DVD mode, advances the disc forward.
FREEZE
When watching TV, freezes the picture until you press another button to resume normal TV
viewing.
Note: Do not use the Freeze feature for an extended period of time. This can cause the image to be permanently imprinted
on the picture tube. Such damage is not covered by your warranty. Press any button to unfreeze the picture at any time.
GO BACK
In TV mode, returns you to the previous channel. In DVD mode, returns to the previous screen.
GUIDE
In TV mode, brings up the
Channel Guide
menu. In DVD mode, brings up DVD guide, if available.
INDICATOR
Indicates the programming mode when programming the remote to control components.
INFO
In TV mode, brings up TV status display; press again to clear the screen. In DVD mode, brings up
the Info Display.
INPUT
Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1, CMP2 and DVI. Press
the CH+ or CH- button to resume TV viewing).
MENU
In TV mode, brings up the TV Main menu. In DVD mode, brings up a reduced TV Menu.
MUTE
Reduces the TV’s volume to its minimum level. Press again to restore the volume.
OK/FREEZE
When in the menu system, selects highlighted items. When watching TV, freezes the picture
until you press another button to resume normal TV viewing.
ON•OFF
When in TV mode, turns the TV on and off. If in another device mode (VCR, DVD, SAT•CABLE,
etc.) and programmed, will turn the device on and off.
PAUSE
In DVD mode, pauses the disc.
PIP
Press once to bring up the small picture-in-picture window. Press again to bring up the picture-
outside-picture (POP) windows. Press to remove POP. (See Chapter 4 for more information about using
PIP.)
PLAY
In DVD mode, plays the disc.
RECORD
If your TV/DVD is connected to a VCR, records TV programs .
REVERSE
In DVD mode, goes backward on a disc.
SAT•CABLE
Puts the remote in SAT•CABLE mode and, if Autotuning is enabled, will turn on the TV and
tune to the correct input channel.
SKIP
Press once before changing channels and the TV will wait 30 seconds before returning you to the
original channel. Press repeatedly to add more time.
SOUND•ANT
In TV mode, displays the Picture and Sound preset settings at the bottom of the TV. In DVD
mode while a disc is playing, displays the DVD Info Display with the Audio icon highlighted.
STOP
In DVD mode, stops playing the disc. Press and hold for 3 seconds to open the disc tray.
SWAP
When using PIP, swaps the main picture with the PIP window. When using POP, swaps the left
and right pictures.
STOP
PAUSE
TV
ON OFF
AUX
DVD
SAT CABLE
PIP SWAP
CH +
CH -
PLAY FORWARD
REVERSE
GUIDE
GO BACK
CH
+
CH
-
VO
L
VO
L
SKIP
MUTE
INFO
MENU
CLEAR
DISC MENU
SOUND ANT
1
2
3
4
5
6
7
8
9
0
INPUT
VCR1
VCR2
OK
RECORD
PIP
ZOOM-
ZOOM+
FREEZE
Indicator
Note: The VCR1, DVD, VCR2, and
SAT•CABLE buttons also turn on most
RCA, GE, and Proscan products.
Tip
To turn off all the RCA, GE, and Proscan
components that are connected to the TV,
press ON•OFF twice within two seconds.
This feature only works with most RCA,
GE, and Proscan products.
Содержание SCENIUM L37WD14
Страница 1: ...HDTV DVD MonitorUser sGuide ...