background image

- 8 -

EN

Sound Enhancement Systems

This receiver is equipped with several built-in sound enhancement 
systems.
Dolby Digital
The Dolby Digital mode lets you enjoy full digital surround from 
software processed in the Dolby Digital format. Dolby Digital provides 
better sound quality and a more powerful presence than conventional 
Dolby Surround. This unit is equipped with Dolby Digital 5.1-channel 
so that you can enjoy enhanced full digital surround sound. Different 
from Dolby Pro Logic in that only four channels (Front Left, Front Right, 
Center and Rear) are used, the new system provides stereo separation of 
the rear speakers (Rear-Right, Rear-Left). Adding the subwoofer channel 
to the 5 channels for bass sounds (counted as 0.1 channel) results in 5.1 
channels (or 6 Channels) input Dolby Digital for that bring you the most 
sophisticated sound enjoyment.
Dolby Pro Logic II
The Pro Logic II mode uses the built-in circuit to steer the Left, Center, 
Right and Surround left and right channel audio signals and uses all five 
speakers to play both stereo and Dolby Pro Logic program source, such 
as TV and VCR.
Dolby Pro Logic II 
includes Dolby Pro 
Logic II Movie, Dolby 
Pro Logic II Music 
and Dolby Pro Logic 
Emulation.
You can use this 
mode with any 
stereo program 
source (such as VCR/
TV) to enjoy multi-
channel sound 
experience.

Center Speaker 

Stereo

The Stereo mode uses the two main channel outputs from the front 
speakers and subwoofer speaker. Use this mode if you have connected 
the front speakers only.
DSP (Digital Sound Processor)
These digital sound effects resemble sounds in a real environment such 
as (HALL, CHURCH, STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC, 
DOLBY PL II MOVIE). DSP automatically converts analog audio signals to 
digital ones which enables you to adjust the sound without degrading 
the sound quality. Different modes will give you different feels of size 
and types of listening environment.
Press  SUBWOOFER  button  to select the subwoofer effects level 
according to you needs. Four settings are available: BALANCE, STRONG, 
POWERFUL and SOFT.

Manufactured under license from Dolby 
Laboratories.  Dolby, Pro Logic, and the double-D 
symbol are trademarks of Dolby Laboratories.

Fine Setting of the Components

You can select the surround mode by pressing SURROUND  button 

follow by   /   button to select among different options. (HALL/

CHURCH/CONCERT/LIVING ROOM/CAVE/ARENA/STEREO/DOLBY PL II 

MUSIC/DOLBY PL II MOVIE/DOLBY PL  EMULATION )

The default surround modes for different components are listed in the 
table below. The unit will keep the last selection in memory.

Analog Inputs
The Home Theater has three analog audio inputs: Analog AUX 1, Analog AUX 

3 (front) and LINE-IN.
Note:

To play Dolby Prologic II Movie sound when listening to an analog audio 

source, press the SURROUND button until “Dolby PL II MOVIE” appears 

on the Display.

To play Dolby Digital sound, the source must be connected to the unit 

via Optical or Coaxial terminals.

Fine Setting of the Speakers

All the basic settings have already been preset for the speakers included 

in the box.

Also, to make the surround sound more effective and suit the acoustic 

conditions in your listening room, you may need to delay the signal 

coming from some of the speakers. Channel delay compensates for 

center or surround speakers that are closer to the listening position 

than the front speakers.
Testing and Adjusting Speaker Loudness
The  TEST TONE button on the remote control allows you to adjust 

each speaker volume level individually to suit your particular listening 

environment.

1.   Press the TEST TONE button.

2.   A tone will be heard at each speaker, one speaker at a time.

3.  Press the   /   button on the remote control to adjust the level of 

the speaker that is playing the tone at the particular moment. The 

Home Theater’s display will also indicate which speaker is playing 

the tone at any particular moment.

4. Press EXIT button to exit this mode.
Adjusting Speaker Loudness Without Using Test Tones
1.   To adjust individual speaker volume level, press LEVEL button on the 

remote control.

2.   Continue to press LEVEL button on the remote control to select the 

speaker to be adjusted, then press the   /   buttons to adjust the 

level.

3. Press EXIT button to exit this mode.

Digital Inputs
The Home Theater has three digital audio inputs and two analog audio 

inputs for BD, SAT-CABLE, DVD,TV or LINE-IN sources.

The default input is optical 1 for SAT-CABLE, optical 2 for BD, and coaxial 

for DVD. However, if you need to assign a source to a different input: 

1.  Select the source (DVD, SAT-CABLE, BD, TV or LINE-IN).

2.  Press the SETUP button to show setup options.

3. Press SOURCE button until OPTICAL 1/ OPTICAL 2/COAXIAL/AUX 1/

AUX 3/LINE IN is displayed.

4. Press SOURCE button to select among OPTICAL 1/ OPTICAL 2/

COAXIAL/AUX 1/AUX 3/LINE IN (different source will have different 

available inputs for selection) to match your connection. Your 

selection will be stored for future use automatically.

You have the capability to change audio inputs for the SAT-CABLE, BD, 

TV or LINE-IN sources.

If digital input
(optical or coaxial)
is selected

Dolby Digital

If analog input is
selected

Source Input

DVD

TV

Dolby Digital

SAT-CABLE

N/A

AM/FM

N/A

VCR

Dolby Digital
Dolby Digital

N/A

BD

LINE IN

Pro Logic II Movie
Pro Logic II Movie
Pro Logic II Movie
Pro Logic II Movie
Stereo
Pro Logic II Movie
Pro Logic II Movie

Default input

Built-in tuner
Front Analog (AUX 3) 
Front Analog (LINE-IN)

Source

DVD

Rear Analog (AUX 1)

TV
TUNER
VCR
LINE-IN

OPTICAL 1

SAT-CABLE

OPTICAL 2

BD

COAXIAL

Advanced Sound Control

AV62781BE_IB_811-A27891W022.indd   8

2014/6/10   15:03:55

Содержание RT2781

























Отзывы: